Patio Misting Anchoring Guide: Wood, Stucco, Concrete and Metal
Shop now: The Patio Misting System Pro →Anchoring the tubing is the second of the five patio misting install steps, and it's the one that decides whether your line looks neat for years or sags by August. The Patio Misting System Pro ships with 50 C-clamps for the job. What changes from patio to patio is the surface you're fastening into.
Wood beams and fascia
Wood is the easiest. Snug each C-clamp around the 1/4" tubing and fasten it to the underside or inner face of the beam with wood screws. Space clamps closely enough that the line runs straight between them, and put a clamp close to each coupler so the nozzle stays pointed where you set it.
Stucco and concrete
Stucco ramadas and concrete overhangs need masonry anchors. Drill a pilot hole, set the anchor and then fasten the clamp. Go slowly with stucco: it's a finish coat over a substrate, and a steady drill helps keep the surface from chipping. The installation guide covers both surfaces.
Metal patio covers
Aluminum and steel covers are common in newer builds. Self-tapping screws go straight through thin metal without a pilot hole and hold the clamps securely, which is the approach the installation guide describes for metal.
Point every port the same way
Whatever the surface, rotate the line so every nozzle port faces outward, away from the wall or beam. Mist aimed at the structure leaves water stains and wastes cooling. Leave the final nozzle off for now; you'll flush the line before installing it.
With the line anchored, move on to step three, attaching nozzles and connecting tubing. The full sequence is on PatioMistingSystemInstallation.com.